The Netgear EX6110 is one powerhouse of a WiFi range extender. It comes packed with smooth Dual-Band 2.4 & 5 Ghz for uninterrupted internet access. Unfortunately, this Netgear networking product suffers from a few drawbacks. One of them is not letting you access the mywifiext web address to make changes to the device’s settings. Don’t worry! We will help you resolve that issue.
Let us first see what it is that is stopping you from doing so.
The Reasons
Given below are 4 reasons why you are not able to access the mywifiext web address.
- Faulty Power Supply
The first culprit behind the problem is an unstable power supply. Have you connected the WiFi extender to a faulty power outlet? This will cause problems when you try to access internet through Netgear EX6110. This also makes it difficult for you to find the Netgear_ext, let alone access the internet.
- Poor Connection
Are your WiFi router and range extender kept far away from each other? Chances are there is a problem with smooth communication between the two devices. Too much distance makes it difficult for the router and extender to maintain steady communication.
On the other hand, too less of a distance leads to a collision between the WiFi signals being broadcasted by both devices. This will also not let you gain access to the extender’s settings.
- Signal Interference
Are there too many devices between the router and Netgear WiFi range extender? There is a high chance this will cause signal interference. Confused? Read further to know. Factors like your neighbor’s WiFi, a separate WiFi network in your home or office, and Bluetooth devices wreak havoc on WiFi reception. These cut the WiFi signals coming from Netgear EX6110.
- Outdated Firmware
Are you using the Netgear WiFi extender with an older firmware? There is a high chance it will interfere when you try to access the internet using the device. Firmware is the OS of the WiFi device and using an older version does not help at all.
As the old saying goes – Where there’s a will, there’s a way. So, no need to be disheartened as we have the solution.
The Solutions
Given below is how you can resolve the “unable to access mywifiext” issue with ease.
- Zero Interference
To ensure there is no issue when you try to access the WiFi range extender settings, you have to keep one thing in mind.
The Netgear WiFi range extender or the router should not be kept near other electronic devices. Also, keep them away from television, radios, microwave ovens, Bluetooth speakers, and baby monitors. Remember this when you are performing Netgear EX6110 setup.
On second thought, keep the extender and router at a good height. Do not place them on the floor behind any of the devices mentioned above.
- Stable Connection
Make sure the connection between the extender and router is stable. Use an undamaged and new Ethernet cable to connect the two. If you use WiFi then make sure that neither of them is kept inside a cabinet or near a solid concrete wall.
- Right Power Supply
Connect the Netgear WiFi range extender to an active power supply. Do not connect it to a faulty or damaged power outlet. It ensures the Netgear EX6110 does give you a headache when you try to access the mywifiext web address.
- Correct Web Address
Are you still not able to access the extender’s settings page? Then, you should consider using the IP address 192.168.1.250. This will help you get access to the said web page using the Netgear EX6110 and make any changes you want to.
Conclusion
Are you facing issues when trying to access mywifiext? Just follow the guidelines mentioned above to resolve the issue without having to invest in a new and expensive device.