One fine day, you wake up and find out that your certain WiFi-enabled devices are unable to connect to the TP-Link extender’s network. But, why does this happen, and how can you resolve it? This article will shed light on one of the most common problems reported by TP-Link users. Now, let’s learn how to resolve the issue within a matter of minutes.
Fixed: Can’t Connect WiFi-Enabled Devices to Extender
- Reboot the TP-Link Extender
One of the easiest ways to resolve the ‘can’t connect WiFi-enabled devices to TP-Link extender’ issue is to reboot your extender. In most cases, the TP-Link extender falls victim to technical glitches while working that are resolved conveniently by rebooting the TP-Link extender.
You need not be a technocrat to give a simple reboot to your range extender. All you need to do is, disconnect your TP-Link extender from the wall plug, let it rest for some time, and connect it back into the wall socket. If rebooting the extender fails to bring you luck, give it a try to the next troubleshooting method.
- Check the WiFi Password
Are you using the correct WiFi password to connect your wireless client devices to the TP-Link extender’s network? It looks like you committed a typo that has led you to the issue you’re currently facing. Thus, make sure that you use the correct WiFi password to connect your client devices to the TP-Link extender’s network. If you’re unsure about the WiFi password, consider cross-checking it by accessing the TP Link extender setup wizard on your computer.
- Update the Firmware
Nothing wrong with the WiFi password? Chances are that your TP-Link extender requires a firmware update. If you are a novice, then let us tell you that your TP-Link range extender operates on firmware. The firmware is responsible for the overall performance of your TP-Link extender. If not updated timely, it can worsen the efficiency of your TP-Link extender. Thus, consider updating the extender’s firmware as soon as possible.
- Turn on your computer and connect it to the TP-Link extender.
- Thereafter, download the latest firmware for your WiFi device and save it on your PC.
- Use unzip tools to extract the firmware file.
- Once done, visit tplinkrepeater.net, and log in to your extender.
- As soon as you get redirected to the Quick Setup wizard, select the Settings tab, and click the System Tools menu.
- Select the Firmware Upgrade option and click Browse to locate the unzipped file of the extender’s firmware.
- Click the Upgrade button and wait till the firmware update process gets completed.
Note: No matter whether you’ve performed a TP-Link AC750 setup or installed any other extender, you can easily update the firmware using the aforementioned steps.
- Reset and Reconfigure
Perhaps, your TP-Link range extender is not installed properly due to which you are unable to connect your WiFi-enabled devices to its network. Thus, you need to perform the TP-Link extender setup again. But before you do that, consider restoring your TP-Link repeater to the factory default settings. For this, locate the Reset button on your WiFi device and press it with the help of a sharp object. Your TP-Link range extender will get restored to the factory default mode.
Now, set up your extender from scratch by accessing the http tplinkrepeater net login page. If you don’t know the steps to install your TP-Link extender, we are here to help you.
Steps to Set Up TP-Link Extender
- Ensure that your TP-Link range extender is receiving an uninterrupted power supply.
- Now, connect it with the host modem either using a wireless source or an Ethernet cable.
- Once done, launch an updated web browser on your PC and move the cursor to the URL bar.
- Visit tplinkrepeater.net to reach the TP-Link extender login page.
- Enter a username and password to log in to your TP-Link repeater.
- You will get redirected to the extender’s web-based management utility.
- The screen will consist of some instructions.
- So, do follow the instructions carefully and install your TP-Link range extender.
After performing TP-Link extender setup again, try to connect your wireless client devices to the WiFi network. This time you’ll surely get success in fixing the issue.
Conclusion
And, that brings us to the end of the post containing troubleshooting hacks to fix the ‘can’t connect WiFi-enabled devices to TP-Link extender’. If you get success in resolving the issue, then pat yourself on the back. You did excellent troubleshooting.