Netgear Extender Not Working? Here’s the Fix!

Photo of author

By admin

Has your Netgear extender stopped working? Well, you need not stress over that. Because we are here to assist you. In this post, we will guide you step-by-step to get rid of the ‘Netgear extender not working’ issue.

But, before that let’s make you aware of the reasons that are contributing to the issue in the first place. The reason being, knowing about the responsible factors, you’ll be able to tackle the problem easily.

Why is Your Netgear Extender Not Working?

Below-mentioned are the topmost reasons why your Netgear extender is not working:

  • Your Netgear extender might be receiving a fluctuated power supply.

  • You might be using a worn-out Ethernet cable to connect your extender and router.

  • The extender is not placed correctly.

  • The Netgear extender has not been set up properly.

Now that you are aware of the reasons behind the ‘Netgear extender not working’ issue, it’s time to dive deep in to solve this troublemaker.

Fixed: Netgear Extender Not Working

  1. Check Cable Connections

Whenever you face the ‘Netgear extender not working’ issue, the first thing you have to do is to check the cable connections. So, verify if the wires connected to your WiFi devices are in working condition or not. In case, you found a damaged wire, you better know what to do. Do not forget to check whether the connection is finger-tight or not.

In addition, check the wall socket using which you have powered your Netgear extender. It is always recommended to plug the Netgear extender into a working wall socket.

  1. Reboot Your Netgear Extender

Technical glitches with your Netgear extender can cause a temporary disruption leading to the ‘Netgear extender not working’ issue. Although the reasons for these glitches are unknown, still you can get rid of them. All you need is to reboot your Netgear wireless extender.

To reboot your WiFi device, switch it off and let it stay idle. When you realize that you have given enough time to your Netgear extender, switch it on. Once done, try to access the mywifiext page on a web browser to see if the issue has been resolved. If not, then give the next troubleshooting hack a shot.

  1. Relocate Your Netgear Extender

Another factor that can make your Netgear extender non-functional is its improper location. Chances are that you have placed your WiFi device in dead zones. So, we suggest you relocate your extender as soon as possible to get the issue resolved. Keep the following points in mind while changing the location of your extender:

  • Keep your Netgear extender in an airy room to prevent overheating.

  • Do not place your Netgear extender near the WiFi interference devices like Bluetooth speakers, cordless phones, refrigerators, microwave ovens, etc.

  • Avoid placing your Netgear extender near the reflexive surfaces and metal objects. They can also create WiFi signal interference.

  • Maintain a safe distance between your Netgear extender and the router. It means, neither too close nor too far. This is because placing them too close can result in a clash of their WiFi signals. While placing them far from each other will make it difficult for the extender to detect the router’s signals.

  • Placing the Netgear extender in the center of a room will expand its WiFi signals in each and every corner of the home.

  1. Set Up Your Netgear Extender Properly

Do the aforementioned troubleshooting hacks fail to resolve the issue for you? It seems that you have performed partial Netgear extender setup. Therefore, the last resort you have left is to factory reset your Netgear extender. For this, ensure that the power LED on your extender is glowing green. Now, look for the Reset button and press it with a sharp object. Once you release the button, your Netgear extender will get restored to its factory default settings.

This time you will surely be able to do away with the issue. So, reconfigure your Netgear extender by accessing

Note: To configure your Netgear extender using an Apple device, you have to access the mywifiext local page to log in to it.

Summing Up

‘Netgear extender not working’ issue can turn your internet experience awry. So, we highly advise you to fix it with the troubleshooting tips discussed in this article. If you found this write-up helpful, drop a word of appreciation in the comment section.