The LED status on your TP Link WiFi extender determines its overall performance. A time may come when you will not be able to see a green and stable LED on your TP Link extender. A time may also come when you see red color LED on your device blinking continuously. The red light issue, if not resolved will never let you access the internet on all your connected devices. But, you don’t have to sweat over it. In this article, we are going to share some of the best tested and proven ways to help you fix TP Link extender red LED issue on the fly. Let’s take the plunge!
Fix: TP Link Extender Red Light Issue
There are several LEDs available on your TP Link WiFi extender. Each LED indicates different statuses. Just in case, you see any of the LED showing red, you will not be able to surf the web, shop, game or play online.
The reason behind the issue can be any one of the following:
-
Loose Ethernet connections
-
Sudden Power outage
-
Extender not receiving steady power supply
-
Incomplete tp link wifi extender setup
-
Bad location of the extender
Bear in mind – if the correct measures aren’t taken to fix the red light issue, it can take hours, days or even months to get resolved. Need not to worry! This piece of writing will take you through the best tips that can help you fix the issue in a jiffy. Scroll down a little!
Fix 1: Check the Power
The first fix in our article to troubleshoot the issue is to check whether the wall socket you are using to plug in your TP Link WiFi extender is well working. If you found any damage in the wall socket, consider using another one. Besides, ensure to plug in the TP Link extender in reach of your existing modem.
Fix 2: Check Ethernet Connections
Loose or faulty Ethernet connections can also lead to TP Link extender red light issues for sure. So, if you have used an Ethernet cable to connect your router and the TP Link extender, make sure that it is properly connected and free of any sort of dust and damage.
Once you’re done, check the Ethernet connection between your router and the extender by accessing the tplinkrepeater setup page.
Fix 3: Power Cycle Your TP Link Extender
Try restarting or power cycling your TP Link extender. Yes, you read it absolutely right! This fix is very effective when it comes to resolving many issues with your TP Link WiFi extender. To power cycle or restart your TP Link extender, do the following:
-
Disconnect your router from the TP Link extender.
-
Then, unplug your TP Link extender from its respective wall socket.
-
Wait for a couple of minutes.
-
Plug in back your TP Link extender again.
-
Check your internet connection by accessing tplinkrepeater setup page.
Fix 4: Update Extender’s Firmware
An outdated firmware version on your TP Link WiFi extender can also create red light issue. Fret not! To fix it, refer to the TP Link extender manual or visit the firmware update page using www.tplinkrepeater.net web address for instructions to update your device’s firmware in no time.
Fix 5: Configure TP-Link Extender Properly
A partial tp-link setup process can also let you experience the red light issue. In order to get the most out of your WiFi range extender, perform and complete the tp link setup process in a proper manner.
Fix 6: Relocate the Extender
If nothing helped you in resolving the issue, then relocating the TP-Link WiFi extender to its ideal location might help you out. So, to fix the red light issue, ensure to place your TP-Link WiFi extender at the center-most, higher, and ventilated location in your home.
Do not place the extender near windows or doors or inside a cabinet.
Here’s to hope that the tp-link troubleshooting tactics given in this article helped you cope with the red light issue? If you are unable to fix the TP-Link extender red light issue even after following the hacks listed above, feel free to leave all your queries in the comments section.