Remote Management is one of the most common features that most users look for while purchasing a Netgear Nighthawk router. This is because the Netgear router Remote Management feature allows you to access its settings distantly. In other words, you can change the WiFi password, update the firmware, or change the operating mode on your router by sitting just about anywhere using the Netgear Remote Management feature. The advantages of the Remote Management feature are not restricted to the accessing the settings of your WiFi device but also have some other perks too. Let us explain.
Advantages of Netgear Router Remote Management
-
Router Remote Management feature allows you to seek help from experts if your device has undergone some serious problem.
-
It also allows you to troubleshoot various issues of other routers belonging to your near and dear ones.
Netgear router Remote Management feature comes turned off by default because your WiFi device comes with the preset password that proves to be an invitation for hackers Therefore, it is best to turn off the router Remote Management feature when not required. However, you need to enable it manually in order to get the best out of your WiFi device. Given below is a list of instructions explaining how to enable the Netgear router Remote Management feature:
Steps to Enable Netgear Router Remote Management
-
Plug your Netgear Nighthawk router into a working power socket and switch it on.
-
Let the power LED on your Nighthawk router become solid green.
-
Now, grab an Ethernet cable and connect it to the existing modem.
-
Once done, turn on your PC and open an internet browser.
-
Go to the address bar and type the default web address of the Nighthawk router into it.
-
Press the Enter key.
-
Use the default login credentials of your WiFi device to reach the routerlogin.net setup wizard.
-
After reaching there, click the Advanced Setup section under the ‘Advanced’ menu.
-
Look for the Remote Management option.
-
Once found, select the ‘Turn Remote Management On’ option.
-
Navigate to the ‘Allow Remote Access By’ section and select whether you want to provide remote access to a specific device or all devices that are in the range of your IP.
-
To give access to only one computer, select the ‘Only This Computer’ option.
-
For this, you need to type the IP address of your computer.
-
If you want to give remote access of your router to various devices, select the ‘IP Address Range’ option.
-
Thereafter, enter the port number and click the Apply button.
-
Wait for some time and let the changes become effective.
That’s it! The router Remote Management is now active on your device. So, you are free to access your Nighthawk router from anywhere. Now, let us guide you on how to access the Netgear router remotely.
How to Access Netgear Router Remotely?
-
Open a web browser on a computer that is not on your home network.
-
Now, move the cursor to the URL bar of the web browser and type the router’s WAN IP address followed by a colon and the custom port number.
-
Press the Enter key.
And, there you go. You can now access the settings of your Netgear Nighthawk router.
This is how you can remotely access your Netgear WiFi router.
Quick Tip: Since you have enabled the Netgear router Remote Management feature on your device, you should have stronger login credentials. So, change the default routerlogin password to something more secure to prevent your device from being accessed by unauthorized users.
Note: Although there is no specified definition of a strong password, you can create a mixture of special characters, digits, and alphabets.
Summing Up
This is all about the Netgear router Remote Management feature. We hope that you will be able to configure it on your Netgear Nighthawk router and access your device distantly. Thanks for reading this article.