Lubrication is very important as it helps lessen the friction in engines and among its parts protecting them from wearing and tearing. The smooth operation of the engines will eventually lessen the chances of damage, thus ensuring smooth flow of operation.
Marine lubrication can be very beneficial especially for businesses that run on maritime fleets to invest on good marine lubricants. Middle East, for example, is a country that has a very extensive maritime industry. And, for many years now, this industry has been very dependent on high quality lubrication and grease such as Shell marine lubricants.
However, it should not just be any kind of lubrication. You need to know what your vessel engine needs. Depending on the kind of engine you have, the kind of lubrication you choose will also matter. The advent of technology has allowed the lubrication industry SQM Club to develop more and more lubricants and greases that specifically targets known problems in marine engines. Thus, it is very important that you as the end-user should be able to identify what kind of lubricant you need for your engine and machines.
An example is Shell Alexia 3 which has been designed as Shell cylinder oil for low speed, two stroke diesel engines. The component of this oil helps protect the engines using low-sulphur fuels from wear and accumulation of deposits. Because this type of lubricant has been specialized to address a specific problem, it is more efficient in protecting the engine. Moreover, this efficacy will then translate to longer oil use and makes oil change less frequent.
There is also the Shell Refrigeration Oil which is very suitable for the protection of a compressor’s bearings and pistons. This oil can also withstand high temperature and oxidation and can maintain the cleanliness and efficiency of the refrigerant.
It is a given that both these oils are used as lubricants. However, based on their specific uses and the way they were developed, it is clear that you cannot interchange their uses. Doing so will result to either low efficiency performance of the lubricants or, worse, engine damage.
For example, if you use Shell Alexia 3 for compressors, it will not be able to do anything considering that it was not designed to withstand high temperature and oxidation. The same goes for Shell Refrigerant Oil when used with low speed, two stroke engines since this lubricant type was not developed to offer optimum protection to engines using low sulphur fuels.
Given this scenario, it is undeniable why it is very important to make sure that you are using the right kind of lubricant for your engines and machines. Thus, it would be very helpful if you consult an expert before you buy your engines, machines and lubricants. You need to know whether or not the kind of engines or machine you bought would require a special kind of lubricant. Then, you need to make sure that that lubricant will within be your operating cost and is readily available in the market. Remember, you cannot put off changing of oil since it will also be damaging to your engine. Thus, you need to make sure that the lubricant you need is always available whenever you need it.
Article Source: http://EzineArticles.com/9171893
https://www.mifare.net/support/forum/users/werdee345/
https://www.facer.io/user/twwUCExxu3
https://notionpress.com/author/429421
https://guides.co/p/dertw-clay
https://mxsponsor.com/riders/warne-trouty
https://www.myminifactory.com/users/werd53