Beginner’s Guide to Paper Cutting

Photo of author

By admin

You may show off your creative side with papercutting, a simple and fun way. We feel that they are a great way to create a beautiful card, particularly if you are short on time, because of our many years of expertise with them.

The following is what’s needed:

You may use an x-acto or a similar knife as long as the blade is sharp and flexible enough to be used as a scalpel. You can’t obtain all the small details with a Stanley knife/box cutter (usually). Because they don’t break as easily as X-acto knives, I prefer using scapulae instead.

The shop where you purchased the scalpel has spare blades. The serial number on the blade’s box is your best bet for confirming compatibility with your equipment before you buy (e.g., 10 A). The performance of various blade shapes has never seemed to vary in my observations.

Rice paper, which has a thickness of roughly 385 GSM, is a wonderful choice if you’re looking for something more delicate (about 2 mm thick). Printing cannot be done on papers with a thinner texture because of their worse tolerance for cuts, blunders, and rips. Cutting shapes from thicker paper is more difficult, but the resulting forms can withstand more damage. A great choice for producing these kinds of cards is the newsagent card material. Using dark colours like black, dark blues, or purples produces a dramatic contrast, which I appreciate.

Use a separate sheet of paper to print your picture and use it as a guide while drawing. Alternatively, like I did, you may print off a picture from the internet and cut it out. Line drawings from the early 1900s are an excellent option since you don’t have to think about it yourself (also, depending on your country, it should be out of copyright). Visit our website to get lightbox free template.

Assemble the cards sequentially.

Cards in Western nations have a left-hand fold, which is commonplace. It would be humiliating for you if you made a mistake. As an alternative, we will dismantle the card and attach the picture to the left-hand side. As a result, we’ve flipped the cuts so that they’re visible on the side opposite the one on which they were done.

Start by slicing the ingredients into smaller pieces.

Pick and pick the pieces of the card you want to colour in and which sections you want to leave uncolored. I try to minimise the amount of damage to my skin, as well as my clothes and other personal effects. When pressed from one end, paper is much weaker in shear than when pulled from both ends. This is the most important factor to keep in mind while cutting paper (if you push on a point). Before removing a portion of the backdrop, make sure to clip in all of your support lines! To avoid losing my cards, I tend to lose track of them when I’m in a rush.