To revamp the range of your existing WiFi network, you need to connect your Netgear range extender to your home router / modem. Using the WiFi Protected Setup method, you can complete the Netgear extender setup process in no time.
This particular post will guide you on how to perform the Netgear extender setup process with great ease. Let’s take the plunge!
How to Set up Netgear WiFi Range Extender Using the WPS Setup Method?
Netgear Extender Setup Using WPS Method
WPS or WiFi Protected Setup is one of the easiest methods to perform the Netgear extender setup process in a hassle-free way. To initiate the process, below are the steps that you need to follow to get the job done:
Step 1: Turn on your Netgear WiFi range extender. Before turning it on, we suggest you find a suitable location for your Netgear extender in your home.
Step 2: Make sure that your Netgear extender is receiving constant WiFi signals from your existing router/ modem. For this, you have to ensure that your existing router/ modem is placed openly on a clean and higher surface neither under a table nor inside a cabinet.
Step 3: Plug your Netgear WiFi extender into a damaged-free wall outlet.
Step 4: Wait for some time. Let the power LED on your Netgear extender become stable. If the power LED on your Netgear extender is taking ages to become stable, push the on/ off (power) button on it once.
Step 5: Afterward, locate the WPS button on your Netgear extender. Once found, push it gently and wait for the WPS LED start blinking.
Step 6: Now, push the WPS button on your existing router/ modem. Make sure that your device (router/ modem) is WPS-capable.
Step 7: When the WPS LED on your router/ modem starts blinking in green color, it means that the connection between your devices is successfully established.
On the off chance if the WPS LED on your Netgear extender or router is blinking in amber or red color, then you have to relocate your devices and initiate the Netgear extender setup process using the WPS method again. Once the WPS process gets completed successfully, we suggest you change the extender’s default settings by navigating to the mywifiext setup page using the default Netgear extender IP address.
Note: If your Netgear extender or your existing router/ modem don’t have the WPS button, then don’t worry. You can setup Netgear extender manually. To get the job done, follow the steps highlighted below:
Netgear Extender Setup Using the Manual Method
Step 1: Plug your Netgear extender in a working wall outlet that must be near to your main router/ modem.
Step 2 : Grab an Ethernet cable and connect your router and your extender with each other properly.
Step 3 : Turn on a WiFi-enabled device as per your liking and connect it to your extender’s WiFi.
Step 4 : Open a web browser and enter mywifiext in the address bar.
Step 5 : Press Enter and you will be redirected to the Netgear Genie setup page. Here, you will get the easy steps to configure your Netgear extender with great ease.
If you don’t want to use the manual method to set up your Netgear WiFi range extender, download and install the Netgear app and follow the on-screen instructions.
Note : To revamp your WiFi experience, it is very important to perform the Netgear extender setup process correctly in exact given order.
Facing issues while setting up your Netgear WiFi range extender? If so, then rather than banging your head against a wall, it is always better to find a better deal with better option, what do you think? If you agree with us, then contact our competent technical experts right away via comments. We will be happy to answer and solve your queries.